Tired of your boring amber colored cluster? Upgrade yours today! With a color of your choice.
Introducing our new line up of gauge cluster lights.
Now available in red, green, blue & bright white!
Check them out here, on our 'gauge | cluster | speedometer' section.
As this project will require a bit of work. We suggest you do a bit of research, before replacing your cluster lights.
Plenty of D.I.Y articles can be found on the website. This can help guide you & make your project easier.
Below is a sample of a gauge cluster taken out. To give you a better idea. Here are some basic D.I.Y pictures.
This image is from an Acura Integra (94-00) model.
After removing your cluster. You can locate the main bulbs used.
3 bulbs were located for the speedometer, RPM, & fuel level. The smaller bulbs are the indicator icons.
Such as: turn signal arrows, seat belt, high beam, etc. For this application. A T5 bulb will be needed, if you want to change your indicator lights. To remove these bulbs, twist them counter clockwise.
Bulb removal & install pictures. You can remove the OEM bulb out of it's socket. By pulling it out gently.
After it is removed. Simply plug in your new l.e.d bulb. If there is no light output after install. Flip the bulb 180 degrees
After all of the l.e.d bulbs are in the sockets. Re-install them into your cluster.
Finished product. Bright RED T10 l.e.d's. installed.
**DISCLAIMER: WE ARE NOT RESPONSIBLE FOR DAMAGES CAUSED BY OUR ARTICLE. WE STRONGLY ENCOURAGE YOU TO RESEARCH, BEFORE YOU PROCEED WITH THIS PROJECT.**